Product Details
5L/Min Oxygen Concentrator Pilot Solenoid Valve Dual Exhaust Two
Position Four Way
5L Big Flow Rate Dual Exhaust Oxygen Concentrator Pilot Generator Machine Solenoid Valve
0.05Mpa~0.35Mpa Low working pressure two position four way
Diaphragm pilot Solenoid valve for application to Oxygen Generator
body material aluminum alloy
Quick Detail:
- 10mm micron pilot actuating valve can be available for option
- With big flow rate to meet the demand of oxygen output during
using.
- Electricity connecting in Wire out-leading with plug as standard,
Din connector available for option
- Low power consumption,energy and cost saving
- Aluminum surface treatment is polished hard anodized or with
sandblast then anodized.
- Working in automatically, swiftly and reliable switching to each
motion in every cycles
- Low noise during working, supporting to improve healthy care
environment
Applications:
DSV series Diaphragm solenoid valve used in the low pressure system
especially use for Oxygen Generator system of medical Industrial
Description:
The solenoid valve used in the oxygen concentrator was spool type
pilot structure. The spool type pilot solenoid valve has a good
application in higher pressure and lower frequency pneumatic
systems, now the diaphragm valve 4 way or 5 way is currently used
in the medical health care oxygen generator equipment due to
diaphragm valve possessing large flow, oil-less air supply, high
temperature and high frequency, The diaphragm valve has the
characteristics of good sealing, reliability, and small dead zone.
It can meet the comprehensive performance of high and low pressure,
vacuum, high and low temperature at the same time, is the perfect
valve suitable for the usage of high purified oxygen separating
system.
Ordering Code:
DSV | 70 | 5L | DC12V | |
DSV:DSV Series 4/2 Diaphragm Solenoid valve | Sizes Code | Applicable Oxygen Generator Flow Capacity
| 12VDC/24VDC | Customized Code Blank: Not Specific |
Specification:
Model no | DSV-70-5L-DC12V |
Working Medium | Compressed Filtered Clean Air |
Body Material | Aluminum Alloy |
Position And Way Numbers | Two Position Four Way |
Coil Voltage | Standard:12VDC/24VDC |
Motion Pattern | Diaphragm Pilot |
Working Pressure | 0.05~0.35MPa |
Operating Temperature | -20~70℃ |
Voltage Tolerance | ±10% |
Insulation&Protection Class | F Class IP65 |


Pneumatic valve,Diaphragm solenoid valve,Oxygen Generator Solenoid
valve
Company Profile
FENGHUA FLUID AUTOMATIC CONTROL CO.,LTD
Fenghua Fluid Automatic control co.,ltd(FLUIDAC) is a serious
professional manufacturer of Pneumatic automation system components
and Fluid Control Products.
Company located in Xikou Ningbo which is the national famous scenic
coastal town enjoying very convenient sea,land and air
transportation
Integrating development,production and sales together, FLUIDAC
possessing advanced equipments and strict complete managing
system.Currently we have main products line Pneumatic Air
Cylinder,Pneumatic Vibrator,Air Hydraulic Pump,Directional Control
Valve,Manual Operated Valve,Flow Control Valve,Pulse Jet Valve,Air
Service Units,Pneumatic Tube Fitting,Air tube,Vacuum
Component,Pressure Switch&Flow Switch etc.
With over 10 years experience and thorough knowledge to pneumatic
and fluid control industrial sector,FLUIDAC dedicates to provide
customers the high quality products,best technical solution and
faithful service.
FLUIDAC taking"customer supreme,quality first,reputation oriented"
as tenet,keeping pace of every technical improvment and
innovation to provide rich stocked standard products and
customerized products also.
FLUIDAC staff promise"Steady Quality Products,Reasonable
Price,Short Leading Time,Honest,Understanding,professional
advice,heart to heart service”
Both for mutual benefit and prosperous futher,FLUIDAC welcome
customers domestic and abroad to contact us for a long term
cooperation.