8mm Diameter 4V Series Pneumatic Solenoid Coil 5/3 Way Pneumatic Cylinder Valves Accessories

8 mm Diameter 4V Series Solenoid Coils 5/3 Way Pneumatic Cylinder Valves Accessories

The life of the 4V series solenoid valve coils will be affected by the above application factors, so in order to ensure that the coil can achieve long-term application, it is necessary to pay attention to avoid the existence of these undesirable application factors.

4V series two-position five-way solenoid valve technical parameters:

1. Action mode: internal pilot type;
2. The maximum pressure resistance: 1.2MPa;
3. The use of pressure: 0.15 ~ 0.8MPa;
4. Working temperature: -5 ~ 50 ° C;
5. Voltage range: ± 10%;
6. Insulation and protection level: F grade. IP65;
7. Wiring form: outlet type or terminal type;
8. The highest operating frequency: 5 times per second;
9. The shortest excitation time: 0.05 seconds

Technical parameter of 8mm diameter 4V120 series electric solenoid coils:

Main dimension of 8 mm diameter DIN43650C 4V110 series solenoid coils:

DC24V/DC12V 4V100 Series Solenoid Coils 5/3 Way Pneumatic Cylinder Valves Accessories:

Production of 220VAC/110VAC 4V series pneumatic solenoid vavle electromagnetic coils:

The service life of the 4V110 solenoid coils is generally determined by the quality of the coil itself, but in terms of the actual service life of the coil, it is also affected by many application factors. Specifically, the factors that adversely affect the life of the coil are as follows:

Factor 1: The heating problem that occurs during the use of the coil

Although the solenoid valve coil will be in contact with electric power, it will generate heat under normal application conditions, but if it is heated due to various external factors, it will also be used because of this heat. Life is shortened.

Factor 2: Poor power usage

If the process of the solenoid valve coil is applied, the process has poor application problems in the power supply, such as excessive voltage supply or excessive current, which may cause certain adverse effects on the life of the coil.

Factor 3: Long-term contact with too humid air

If you use the solenoid valve coil to make it contact with very humid air for a long time, it will also have a certain adverse effect on the service life of the coil.

The choice of 4V series solenoid valve coils should pay attention to four points: applicability, reliability, safety and economy.

1. Applicability:

The fluid in the line must match the medium calibrated in the selected solenoid valve series.

The temperature of the fluid must be less than the calibration temperature of the solenoid valve selected.

2. Reliability:

The solenoid valve coil is divided into two types: normally closed and normally open. Generally, the normally closed type is used. The power is turned on and the power is turned off. However, when the opening time is very long, the normally open type is selected when it is short.

3. Security:

1) The general solenoid valve is not waterproof. When the conditions are not allowed, please choose waterproof type. The factory can be customized.

2) The highest nominal pressure of the solenoid valve coil must exceed the maximum pressure in the pipeline, otherwise the service life will be shortened or other accidents will occur.

3) The explosive environment must use the corresponding explosion-proof products.

4. Economic:

There are many solenoid valve coils that can be used universally, but the most economical products should be selected on the basis of meeting the above three points.

Welcome to your inquiry!

* Foucus on your demand, Offer you best solutions as the first mission of Ningbo Brando Hardware Co., Ltd, we work on designing and manufacturing solenoid coils, solenoid armatures and solenoid valves for more than 15 years.   * We have served customers from Europe, North America, Middle east, Southeast Asian by designing and manufacturing for their automation fluid control applications, related to industries of pneumatic automation equipment, food beverage dispenser, agricultural irrigation, printing and dyeing, dust collector, home appliance, automobile, textile, refrigeration, etc.

* Since the company's inception, we are dedicated to providing high quality products and service to our customers. With focusing on our customers' demands, at before production we discuss technical points according to applications with customers to reduce mistake and save cost for both sides. During production, we use high precision CNC machine, machining center to control dimensions and improve productivity. At beginning and mid of machining, our senior inspectors check quality regularly by recording data on documents as per ISO9001 management system. Before shipment, our staff make testing and complete inspection one piece by one piece to ensure the products without defect when reached our customer's hands.

* Ningbo Brando Hardware Co., Ltd will offer you best service with fast response, let's make the fluid control application more widely and smartly.

Product Categories:

1. Solenoid Valve
2. Solenoid Coil
3. Solenoid Armature
4. Solenoid Coil Connector
5. Solenoid Valve Timer
6. Pulse Valve
7. Valve Diaphragm
8. Pulse Controller
9. Refrigeration Valve
10. Pneumatic Valve
11. Pneumatic Fitting
12. Pneumatic Cylinder
13. Pneumatic Filter Regulator Lubricator
14. Pneumatic Vibrator
15. Ball Valve
16. Butterfly Valve
15. and so on